Actuator Motor 742Installation & Operation Manual742_D10/13AccessoriesReplaces: 08/13© 2013 742_D - 10/131 of 8The Actuating Motor 742 uses a 0-1
© 2013 742_D - 10/132 of 8InstallationCheck the ContentsCheck the contents of this package. If any of the contents listed are missing or damaged, pl
© 2013 742_D - 10/133 of 8Step 2 - MountingUsing a Phillips screwdriver, remove the two screws in the corners of the actuator cover. Remove the cove
© 2013 742_D - 10/134 of 8Step 3 - WiringConduit ConnectorPull wires through conduit connector and provide enough wire length to connect to wiring t
© 2013 742_D - 10/135 of 8Step 4 - Switch SettingsSwitch 1 ------------------------------------------------------------ ----------------------------
© 2013 742_D - 10/136 of 8Step 5 - Final AssemblyInstall actuator cover onto the actuator. Using a Phillips screwdriver, tighten the two screws.Inst
© 2013 742_D - 10/137 of 8Technical DataActuating Motor 742 0-10 V (dc)Literature 742_C, 742_DPackaged weight 1.1 lbs (500 g)Dimensions3-5/8" H
All specifications are subjectto change without notice.8 of 8 742_D - 10/13.Product design, software and literature are Copyright ©2013 by tekmar Cont
Comments to this Manuals