Tekmar M3061 Mixing Valve Adapter Kit User Manual download pdf

D 011A

11/08

- Data Brochure

Mixing Valve Adapter Kit M3061

The M3061 Mixing Valve Adapter Kit allows mounting of a Belimo GMB24-3

floating point actuator to tekmar cast iron mixing valves. It is compatible with tekmar

valve models 016 through 026. The Belimo actuator is available for purchase through

tekmar (part # M3062) or through an authorized Belimo representative.

Installation

Check the contents of the package. If any of the items listed below are missing or damaged, please refer to the Limited

Warranty and Product Return Procedure on the back of this brochure and contact your wholesaler or local tekmar

representative.

The Mixing Valve Adapter Kit M3061 contains the following components:

Component List

Standoff

(x2)

#8 machine screw

(x2)

Adapter PlateCoupler Shaft

Remove existing actuating motor from

mixing valve. Leave handle in place.

Thread standoff posts into top of valve

and snug tight. Do not over-tighten.

Insert coupler into valve handle, with

both coupler notches pressed into

grooves in handle.

Slide adapter plate over coupler with

torque post facing upwards.

Thread #8 machine screws through

adapter plate holes and into top of

standoff posts. Tighten snug.

Slide Belimo GMB24-3 Actuator first

into torque post (A), then down on

coupler shaft (B). Tighten both of the

shaft clamp nuts. See “Setting the

Belimo Actuator” on next page.

torque post

1 2

tekmar Control Systems Ltd., Canadatekmar Control Systems, Inc., U.S.A.Head Office: 5100 Silver Star RoadVernon, B.C. Canada V1B 3K4(250) 545-7749 Fa

Tekmar M3061 Mixing Valve Adapter Kit User Manual